Apakah saya perlu memanaskan untuk menjahit di musim dingin..Sebuah metode pemanasan yang lebih formal adalah dengan menggunakan termostat khusus untuk memanaskan sealant. Dibandingkan dengan modus pemanasan air panas, keuntungan dari termostat adala

If the temperature is lower than 10 degrees Celsius in winter, the tile adhesive needs to be heated before use. This is because there are two special substances in sealant, epoxy and hardener, which are easily affected by temperature. Too low a temperature will cause it to thicken, and eventually the sealant will not glue out.Therefore, when using sealant in low temperature environment, it can be heated in hot water for about 5 minutes first, or it can be heated in the thermostat before use.

1, Hot water heating

The construction team of Kelin epoxy gap filler manufacturer usually uses hot water heating to heat sealant. Operation simple, the only need to use a bucket to add just the right amount of hot water, the temperature at about 70 ° C, then the seam an agent into the bottle to soak in hot water, soak 5-10 minutes can try out glue whether smooth, if the gel is still difficult, then you can soak for a while and then out to use more, until the colloid can easily hit.

2, Thermostat heating

There are many sewing workers in the construction team of Kelin tile joint sealant supplier, and their opinions are relatively unified. They all like to use hot water to heat the sewing agent. What do you think?